Bootdata ok (command line is root=/dev/ram0 init=/linuxrc real_root=/dev/sda3 profile=10) Linux version 2.6.3-gentoo-r2 (root@livecd) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #1 Fri Mar 12 14:54:33 CST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff40000 (usable) BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data) BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) ACPI: have wakeup address 0x10000001000 found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 524096 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 520000 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 PCI bridge 00:0a from 10de found. Setting "noapic". Overwrite with "apic" ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa530 ACPI: RSDT (v001 A M I OEMRSDT 0x11000319 MSFT 0x00000097) @ 0x000000007ff40000 ACPI: FADT (v002 A M I OEMFACP 0x11000319 MSFT 0x00000097) @ 0x000000007ff40200 ACPI: MADT (v001 A M I OEMAPIC 0x11000319 MSFT 0x00000097) @ 0x000000007ff40390 ACPI: OEMB (v001 A M I OEMBIOS 0x11000319 MSFT 0x00000097) @ 0x000000007ff50040 ACPI: DSDT (v001 SK8N_ SK8N_404 0x00000404 INTL 0x02002026) @ 0x0000000000000000 ACPI: Local APIC address 0x00000000fee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: TEMPLATE <6>Product ID: SK8N <6>APIC at: 0xFEE00000 I/O APIC #1 Version 17 at 0xFEC00000. Processors: 1 Checking aperture... CPU 0: aperture @ e8000000 size 128 MB Built 1 zonelists Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/sda3 profile=10 console=tty0 kernel profiling enabled Initializing CPU#0 PID hash table entries: 16 (order 4: 256 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 1600.023 MHz processor. Console: colour VGA+ 80x25 Memory: 2049032k/2096384k available (2756k kernel code, 46580k reserved, 1238k data, 176k init) Calibrating delay loop... 3170.30 BogoMIPS Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: AMD Opteron(tm) Processor 142 stepping 01 POSIX conformance testing by UNIFIX Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040116 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LKLN] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LAUI] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LKMO] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI-0145: *** Error: Return object type is incorrect [\_SB_.LATA._CRS] (Node 0000010037df9540), AE_TYPE ACPI: PCI Interrupt Link [LATA] (IRQs 3 4 6 7 10 11 12 14 15) SCSI subsystem initialized ACPI: PCI Interrupt Link [LKSM] enabled at IRQ 11 ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: Maximum main memory to use for agp memory: 1919M agpgart: AGP aperture is 128M @ 0xe8000000 PCI-DMA: Disabling IOMMU. powernow-k8: Power state transitions not supported IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ ikconfig 0.7 with /proc/config* devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 SGI XFS with large block/inode numbers, no debug enabled Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3: IDE controller at PCI slot 0000:00:08.0 NFORCE3: chipset revision 165 NFORCE3: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3: 0000:00:08.0 (rev a5) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hdc: SONY CD-ROM CDU5221, ATAPI CD/DVD-ROM drive Using anticipatory io scheduler ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.00 loaded. sata_promise version 0.89 ata1: SATA max UDMA/133 cmd 0xFFFFFF00000DA200 ctl 0xFFFFFF00000DA238 bmdma 0x0 irq 5 ata2: SATA max UDMA/133 cmd 0xFFFFFF00000DA280 ctl 0xFFFFFF00000DA2B8 bmdma 0x0 irq 5 ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023 88:203f ata1: dev 0 ATA, max UDMA/100, 321672960 sectors (lba48) ata1: dev 0 configured for UDMA/100 scsi0 : sata_promise ata2: no device found (phy stat 00000000) ata2: thread exiting scsi1 : sata_promise Vendor: ATA Model: HDS722516VLSA80 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) SCSI device sda: drive cache: write through /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed generic_sse: 4888.000 MB/sec raid5: using function: generic_sse (4888.000 MB/sec) raid6: int64x1 1332 MB/s raid6: int64x2 2019 MB/s raid6: int64x4 2066 MB/s raid6: int64x8 1453 MB/s raid6: sse2x1 878 MB/s raid6: sse2x2 1542 MB/s raid6: sse2x4 2226 MB/s raid6: using algorithm sse2x4 (2226 MB/s) md: raid6 personality registered as nr 8 md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.0.0-ioctl (2003-06-04) initialised: dm@uk.sistina.com NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 176k freed sbp2: $Rev: 1096 $ Ben Collins sh-2021: reiserfs_fill_super: can not find reiserfs on sda3 kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 EXT3 FS on sda3, internal journal st: Version 20040122, fixed bufsize 32768, s/g segs 256 kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Disabled Privacy Extensions on device ffffffff8048df00(lo) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.23. PCI: Enabling device 0000:00:05.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:05.0 to 64 eth0: forcedeth.c: subsystem: 01043:80c5 bound to 0000:00:05.0 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 440 bytes per conntrack process `named' is using obsolete setsockopt SO_BSDCOMPAT eth0: no IPv6 routers present