VBoxHeadless - Running Virtual Machines With VirtualBox 3.1.x On A Headless Mandriva 2010.0 Server
Version 1.0
Author: Falko Timme 
Follow me on Twitter
This guide explains how you can run virtual machines with Sun VirtualBox 3.1.x on a headless Mandriva 2010.0 server. Normally you use the VirtualBox GUI to manage your virtual machines, but a server does not have a desktop environment. Fortunately, VirtualBox comes with a tool called VBoxHeadless that allows you to connect to the virtual machines over a remote desktop connection, so there's no need for the VirtualBox GUI.
I do not issue any guarantee that this will work for you!
1 Preliminary Note
I have tested this on a Mandriva 2010.0 server (host system) with the IP address 192.168.0.100 where I'm logged in as a normal user (user name administrator in this example) instead of as root.
If you only have a root account, but no normal user account, create one as follows (user administrator, group administrator)...
# groupadd administrator
# useradd -d /home/administrator -m -g administrator -s /bin/bash administrator
... create a password for the new user...
# passwd administrator
... and log in as that user.
2 Installing VirtualBox
To install VirtualBox 3.1.x on our Mandriva 2010.0 server, we need root privileges, therefore we run
$ su
Then we install the dependencies for VirtualBox 3.1.x as follows:
# urpmi wget flex gcc gcc-c++ kernel-devel kernel-headers dkms
Next we pick the right VirtualBox package from http://www.virtualbox.org/wiki/Linux_Downloads; pick the i386 or AMD64 package (depending on your architecture) for Mandriva 2009.1 / 2010.0 (you can find out your architecture by running
# uname -m
The output on my test system is
[root@server1 administrator]# uname -m
x86_64
[root@server1 administrator]#
which means I must pick the AMD64 package.
)...
... and download it as follows:
# cd /tmp
# wget http://download.virtualbox.org/virtualbox/3.1.4/VirtualBox-3.1-3.1.4_57640_mdv2009.1-1.x86_64.rpm
It is possible that the package gets stored as .rpm?xxx instead of just .rpm. To check this, run
# ls -l
[root@server1 tmp]# ls -l
total 39276
-rw-r--r-- 1 root root 40216327 2010-02-12 23:03 VirtualBox-3.1-3.1.4_57640_mdv2009.1-1.x86_64.rpm?e=1268058956&h=2e09ee7de5b4dc8427cde168836915dc
[root@server1 tmp]#
As you see, my package is named VirtualBox-3.1-3.1.4_57640_mdv2009.1-1.x86_64.rpm?e=1268058956&h=2e09ee7de5b4dc8427cde168836915dc. Therefore I rename it:
# mv VirtualBox-3.1-3.1.4_57640_mdv2009.1-1.x86_64.rpm\?e\=1268058956\&h\=2e09ee7de5b4dc8427cde168836915dc VirtualBox-3.1-3.1.4_57640_mdv2009.1-1.x86_64.rpm
(You can use the TAB key to let the shell auto-complete the filename.)
Afterwards, we install VirtualBox 3.1.x as follows:
# urpmi VirtualBox-3.1-3.1.4_57640_mdv2009.1-1.x86_64.rpm
Now we must add the user that will run VirtualBox (administrator in this example) to the vboxusers group:
# /usr/sbin/usermod -G vboxusers administrator
VirtualBox is now installed and ready to be used.
Type
# exit
to leave the root account and become a normal user (administrator) again.
3 Using VirtualBox On The Command Line
3.1 Creating A VM
To create a VM on the command line, we can use the VBoxManage command. See
$ VBoxManage --help
for a list of available switches and (highly recommended!) take a look at http://www.virtualbox.org/manual/UserManual.html#vboxmanage.
I will now create an Ubuntu 9.10 Server VM with 256MB memory and a 10GB hard drive from the Ubuntu 9.10 Server iso image (which I have stored in /home/administrator/ubuntu-9.10-server-amd64.iso):
$ VBoxManage createvm --name "Ubuntu 9.10 Server" --register
$ VBoxManage modifyvm "Ubuntu 9.10 Server" --memory 256 --acpi on --boot1 dvd --nic1 bridged --bridgeadapter1 eth0
$ VBoxManage createhd --filename Ubuntu_9_10_Server.vdi --size 10000 --register
$ VBoxManage storagectl "Ubuntu 9.10 Server" --name "IDE Controller" --add ide
$ VBoxManage storageattach "Ubuntu 9.10 Server" --storagectl "IDE Controller" --port 0 --device 0 --type hdd --medium Ubuntu_9_10_Server.vdi
$ VBoxManage storageattach "Ubuntu 9.10 Server" --storagectl "IDE Controller" --port 1 --device 0 --type dvddrive --medium /home/administrator/ubuntu-9.10-server-amd64.iso
3.2 Importing An Existing VM
Let's assume you have a VM called examplevm that you want to reuse on this host. On the old host, you should have a directory Machines/examplevm in the VirtualBox directory; Machines/examplevm should contain the examplevm.xml file. Copy the examplevm directory (including the examplevm.xml file) to your new Machines directory (if your user name is administrator, this is /home/administrator/.VirtualBox/Machines - the result should be /home/administrator/.VirtualBox/Machines/examplevm/examplevm.xml).
In addition to that copy the examplevm.vdi file from the old VDI directory to the new one (e.g. /home/administrator/.VirtualBox/VDI/examplevm.vdi).
Afterwards, you must register the imported VM:
$ VBoxManage registervm Machines/examplevm/examplevm.xml
3.3 Starting A VM With VBoxHeadless
Regardless of if you create a new VM or import and old one, you can start it with the command:
$ VBoxHeadless --startvm "Ubuntu 9.10 Server"
(Replace Ubuntu 9.10 Server with the name of your VM.)
VBoxHeadless will start the VM and a VRDP (VirtualBox Remote Desktop Protocol) server which allows you to see the VM's output remotely on another machine.
To stop a VM, run
$ VBoxManage controlvm "Ubuntu 9.10 Server" poweroff
To pause a VM, run
$ VBoxManage controlvm "Ubuntu 9.10 Server" pause
To reset a VM, run
$ VBoxManage controlvm "Ubuntu 9.10 Server" reset
To learn more about VBoxHeadless, take a look at
$ VBoxHeadless --help
