How to Install SOPlanning on CentOS 7

In this tutorial, we will show you how to install SOPlanning on a CentOS 7 VPS.

SOPlanning is a simple open-source online planning tool designed to improve the visibility of as well as easily plan projects and tasks. This tool is very useful for any projects, small businesses, production plants, booking systems, vacation management, and much more. We can plan tasks by associating a person with a project. Let’s begin with the installation.

Prerequisites

This is what you’ll need in order to install and run SOPlanning on your server. We’ll go through these throughout the tutorial.

  • A CentOS 7 VPS
  • LAMP stack (consists of Linux, Apache, MySQL, and PHP)
  • SSH access with root privileges (or access to a user with sudo privileges)

Step 1: Log in to the Server and Update

We start by logging in to our VPS using the SSH command.

# ssh root@IP_Address -p Port_number

Replace “root” with a user that has sudo privileges if necessary. Additionally, replace “IP_Address” and “Port_Number” with your server’s respective IP address and SSH port.

Once that is done, you can check whether you have the proper CentOS 7 version installed on your server with the following command:

# cat /etc/redhat-release

You should get this output:

CentOS Linux release 7.6.1810 (Core)

Then, run the following command to make sure that all installed packages on the server are updated to their latest available versions:

# yum update

We can now start with the installation of our LAMP stack.

Step 2: Install Apache

If you don’t have Apache, you can install it by invoking the following command:

# yum install httpd openssl mod_ssl

Once installed, let’s enable it on boot and start the service.

# systemctl enable httpd
# systemctl start httpd

Step 3: Install MariaDB Server

In order to be able to install SOPlanning, we need to install MySQL (or MariaDB, an open-source variant) onto our server.

# yum install mariadb-server

Once installed, let’s enable it on boot and start the service.

# systemctl enable mariadb
# systemctl start mariadb

At this point, MariaDB is running and we are now going to create a password for the root user. Run the following command to create a root password, remove the test database, remove the anonymous user, before finally reloading the privileges.

# mysql_secure_installation

When prompted, answer the questions below by following the guide.

Enter current password for root (enter for none): Press the [Enter] key on your keyboard.
Set root password? [Y/n]: Y
New password: Enter a new password
Re-enter new password: Repeat the new password
Remove anonymous users? [Y/n]: Y
Disallow root login remotely? [Y/n]: Y
Remove test database and access to it? [Y/n]: Y
Reload privilege tables now? [Y/n]: Y

Step 4: Install PHP

By default, CentOS 7 provides PHP 5.4 in their built-in repositories. However, for this tutorial we will be using PHP 7.2, a version of PHP not currently available through the default repositories. That’s why we’ll add a third-party repository instead.

First, we need to set up YUM to be able to install third-party repositories in the first place. We can do so by executing this command:

# yum install epel-release yum-utils -y

Once that is done, we can proceed to install ‘remirepo’, our choice of  third-party repository for this tutorial:

# yum install http://rpms.remirepo.net/enterprise/remi-release-7.rpm

According to the documentation, SOPlanning at the time of writing supports PHP 7.2. To configure the repository, we need to run:

# yum-config-manager --enable remi-php72

At this point we can install PHP 7.2

# yum install php php-common php-mysql php-opcache php-mcrypt php-cli php-gd php-curl php-xml -y

Now that PHP 7.2 is installed, let’s check and verify it.

# php -v
PHP 7.2.19 (cli) (built: May 29 2019 11:04:13) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.2.0, Copyright (c) 1998-2018 Zend Technologies
with Zend OPcache v7.2.19, Copyright (c) 1999-2018, by Zend Technologies

We can now continue with our setup process.

Step 5: Create a Database

We now need to create a database for SOPlanning to be able to store its data. We can create one using the following commands. Please note that you will be asked for the MariaDB root password that you created earlier in Step 3:

# mysql -u root -p
mysql> create database soplanning;
Query OK, 1 row affected (0.00 sec)

mysql> grant all on soplanning.* to soplanning@localhost identified by 'm0d1fyth15';
Query OK, 0 rows affected, 1 warning (0.00 sec)

mysql> flush privileges;
Query OK, 0 rows affected (0.00 sec)

mysql> quit

Please change the password ‘m0d1fyth15‘ above to your desired one – make sure it’s a strong password.

Step 6: Create an Apache Virtual Host

This is an optional step if you wish to access your SOPlanning site using a domain name. In order to be able to access our SOPlanning site through a domain name instead of an IP address, we need to set up a virtual host using our Apache server. We need to create a config file at the /etc/httpd/conf.d/ directory using our preferred text editor. For this tutorial, we’ll be using ‘nano’:

# nano /etc/httpd/conf.d/yourdomainname.conf

Then fill the file with this text. Remember to replace ‘YOUR_SERVER_IP‘ with your server’s public IP address, and all instances of ‘yourdomainname.com‘ with your registered domain name.

<VirtualHost YOUR_SERVER_IP:80>
ServerAdmin webmaster@yourdomainname.com
DocumentRoot "/var/www/html/soplanning/www"
ServerName yourdomainname.com
ServerAlias www.yourdomainname.com
ErrorLog "/var/log/httpd/yourdomainname.com-error_log"
CustomLog "/var/log/httpd/yourdomainname.com-access_log" combined

<Directory "/var/www/html/soplanning/www">
DirectoryIndex index.php index.html
Options FollowSymLinks
AllowOverride All
Require all granted
</Directory>
</VirtualHost>

Then save and quit the text editor. We now need to restart Apache in order for our changes to take effect:

# systemctl restart httpd

Step 7: Download SOPlanning

In this step, we will download and extract the downloaded file into the /var/www/html/soplanning directory. That can be done with these four commands. Execute them one-by-one:

# cd /var/www/html
# wget https://sourceforge.net/projects/soplanning/files/latest/download -O soplanning.zip
# unzip soplanning.zip
# chown -R apache: /var/www/html/soplanning

Step 8: Install SOPlanning

To start installing SOPlanning on your domain, let’s navigate to http://yourdomainname.com using your preferred web browser.

Next is to configure the database parameters – we’ll use the credentials that we created earlier in Step 5, then click on the ‘Launch install’ button.

Congratulations, SOPlanning has been successfully installed! You can now log in to the dashboard by clicking the ‘Click here’ link found on the page. The default username and password are both the phrase ‘admin’. Make sure that you change the password to a stronger one once you log in.

Need a fast and easy fix?
✔ Unlimited Managed Support
✔ Supports Your Software
✔ 2 CPU Cores
✔ 2 GB RAM
✔ 50 GB PCIe4 NVMe Disk
✔ 1854 GeekBench Score
✔ Unmetered Data Transfer
NVME 2 VPS

Now just $43 .99
/mo

GET YOUR VPS

Once logged in, you can see the dashboard. For more information about how to use SOPlanning, you can read their documentation.

Step 9: Install an SSL Certificate (Optional)

In this step, we will show you how to install an SSL certificate from Let’s Encrypt.

# yum install certbot-apache
# certbot

You will be asked for your email address, then you need to agree with their ToS to proceed with the certificate installation.

If there is no issue when requesting the certificate, Certbot will automatically create a new Apache virtual host to apply the certificate configuration.

At this point, you can access your SOPlanning installation from https://yourdomainname.com.


Of course, you don’t have to install SOPlanning on CentOS 7 if you use one of our CentOS Hosting services, in which case you can simply ask our expert Linux admins to install SOPlanning onto your CentOS 7 VPS for you. They are available 24×7 and will take care of your request immediately.

PS. If you liked this post on how to install SOPlanning on CentOS 7, please share it with your friends on the social networks using the share buttons below, or simply leave a reply in the comments section. Thanks.

4 thoughts on “How to Install SOPlanning on CentOS 7”

  1. I am getting error “please add read/write rights on “../../www/upload/files” directory when i try to launch the website from the browser. I have set 775 permissions on upload and files folder.

    What could i be doing wrong?

    Reply
  2. You should check that you have added the correct owner and group of the files also in order for the installation to work properly

    Reply
      • The ‘chown -R apache: /var/www/html/soplanning’ line changes the permissions, if the setup doesn’t work please re-check that you have followed all the commands in the tutorial

        Reply

Leave a Comment