Install Puppet Master and Agent on Ubuntu 20.04

Puppet is a free and open-source automated administrative engine for Linux, Unix, and Windows operating systems. It is used for deploying, configuring, and managing servers and performs administrative tasks such as adding users, installing packages, and many more. It helps system admins to free up time and mental space by automating tasks on thousands of physical and virtual machines. It uses a client-server model. Where Puppet master controls configuration information for Puppet agents while Puppet agents talk to and pull down configuration profiles from the Puppet master.

In this tutorial, we will explain how to install a Puppet server and agent on Ubuntu 20.04 server.

Prerequisites

  • Two server running Ubuntu 20.04.
  • A root password is configured on both servers.

Getting Started

First, you will need to update all packages on Puppet master and Puppet client systems. You can update them by running the following command:

apt-get update -y

Once all the packages are up-to-date, you can proceed to the next step.

Setup Hostname Resolution

Next, you will need to setup hostname on both nodes. So each node can communicate with each other by hostname. You can do it by editing /etc/hosts file on both node:

nano /etc/hosts

Add the following lines on both node:

puppet-master-ip puppetmaster puppet
puppet-client-ip puppetclient

Save and close the file when you are finished. Then, you can proceed to the next step.

Install Puppet Server

First, you will need to install the Puppet server on the master node. By default, the Puppet package is not available in the Ubuntu 20.04 default repository. So you will need to install the Puppet repository in your server.

First, download the latest version of Puppet with the following command:

wget https://apt.puppetlabs.com/puppet6-release-focal.deb

Once the package is downloaded, install it by running the following command:

dpkg -i puppet6-release-focal.deb

Once the installation is completed, update the repository and install the Puppet server by running the following command:

apt-get update -y
apt-get install puppetserver -y

After installing Puppet server, you will need to change Puppet Java process memory allocation size. You can do it by editing /etc/default/puppetserver file:

nano /etc/default/puppetserver

Change memory size to 1g as shown below:

JAVA_ARGS="-Xms1g -Xmx1g -Djruby.logger.class=com.puppetlabs.jruby_utils.jruby.Slf4jLogger"

Save and close the file when you are finished. Then, start the Puppet service and enable it to start at system reboot with the following command:

systemctl start puppetserver
systemctl enable puppetserver

Next, you can verify the status of the Puppet service with the following command:

systemctl status puppetserver

You should see the following command:

? puppetserver.service - puppetserver Service
     Loaded: loaded (/lib/systemd/system/puppetserver.service; disabled; vendor preset: enabled)
     Active: active (running) since Sat 2020-09-05 09:33:55 UTC; 3s ago
    Process: 3673 ExecStart=/opt/puppetlabs/server/apps/puppetserver/bin/puppetserver start (code=exited, status=0/SUCCESS)
   Main PID: 3715 (java)
      Tasks: 42 (limit: 4915)
     Memory: 962.3M
     CGroup: /system.slice/puppetserver.service
             ??3715 /usr/bin/java -Xms2g -Xmx2g -Djruby.logger.class=com.puppetlabs.jruby_utils.jruby.Slf4jLogger -XX:OnOutOfMemoryError="kill>

Sep 05 09:33:08 puppetmaster systemd[1]: Starting puppetserver Service...
Sep 05 09:33:55 puppetmaster systemd[1]: Started puppetserver Service.

Once you are finished, you can proceed to the next step.

Install and Configure Puppet Agent

At this point, the Puppet server is installed and configure. Now, you will need to install the Puppet agent on the client node.

First, download and install the Puppet repository with the following command:

wget https://apt.puppetlabs.com/puppet6-release-focal.deb
dpkg -i puppet6-release-focal.deb

Next, update the repository and install the Puppet agent by running the following command:

apt-get update -y
apt-get install puppet-agent -y

After installing Puppet agent, you will need to edit the Puppet configuration file and define the Puppet master information:

nano /etc/puppetlabs/puppet/puppet.conf

Add the following lines:

[main]
certname = puppetclient
server = puppetmaster

Save and close the file when you are finished. Then, start the Puppet agent service and enable it to start at boot with the following command:

systemctl start puppet
systemctl enable puppet

Next, verify the status of the Puppet with the following command:

systemctl status puppet

You should get the following output:

? puppet.service - Puppet agent
     Loaded: loaded (/lib/systemd/system/puppet.service; enabled; vendor preset: enabled)
     Active: active (running) since Sat 2020-09-05 09:43:15 UTC; 22s ago
   Main PID: 1435 (puppet)
      Tasks: 2 (limit: 2353)
     Memory: 52.8M
     CGroup: /system.slice/puppet.service
             ??1435 /opt/puppetlabs/puppet/bin/ruby /opt/puppetlabs/puppet/bin/puppet agent --no-daemonize

Sep 05 09:43:15 puppetagent systemd[1]: Started Puppet agent.

At this point, the Puppet agent is installed and configured. Now, you can proceed to the next step.

Sign Puppet Agent Certificate

Puppet uses a client-server architecture so you will need to approve a certificate request for each agent node before it can configure it.

On the Puppet master node, run the following command to list all certificate:

/opt/puppetlabs/bin/puppetserver ca list

You should see the following output:

Requested Certificates:
    puppetclient       (SHA256)  A4:9A:E9:87:8B:54:0A:4F:A0:78:65:1A:3C:99:B5:EC:31:9E:BB:4C:17:8A:50:16:E9:1E:3D:D6:27:74:89:85
    puppetmaster       (SHA256)  E9:25:4C:51:4E:47:D7:44:11:1F:C5:A9:4E:96:D9:E8:3A:EB:A0:01:48:06:B5:EF:3F:C4:09:03:90:3E:D8:2D

Now, sign all the certificate with the following command:

/opt/puppetlabs/bin/puppetserver ca sign --all

You should get the following output:

Successfully signed certificate request for puppetclient
Successfully signed certificate request for puppetmaster

Now, Puppet master can able to communicate and control the agent node.

On the Puppet agent node, test the Puppet master and agent communication with the following command:

/opt/puppetlabs/bin/puppet agent --test

If everything is fine, you should get the following output:

Info: Using configured environment 'production'
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Retrieving locales
Info: Caching catalog for puppetclient
Info: Applying configuration version '1599300398'
Notice: Applied catalog in 0.02 seconds

Conclusion

Congratulations! you have successfully installed and configured Puppet master and agent on Ubuntu 20.04 server. You can now easily add multiple agents and manage them easily with Puppet.

Share this page:

3 Comment(s)