Switch Port Report 1.7 update
|
|
The Script has been tested with the above devices... If you have run this script against other devices, please let us know. Also the speed in the report function has drastically increased. I ran this script against a 6509 with 800+ devices connected to it in just over 2 minutes.
|
|
This is a big update for Port Report.... In this revision the following brands and devices are supported. HP, Cisco, Nortel, and Foundry.
This Python script will report based on either Port, Mac, IP, or ALL MAC Addresses connected to each port.
1. Cisco
* Catalyst 6509 w/ Supervisor 720 running IOS
* Catalyst 3560
* Catalyst 3550 (SMI)
* Cisco CIGESM series Chassis Blades
* Cisco Catalyst 2960
2. Foundry
* Foundry Server Iron
3. Nortel
* Nortel Passport 8600
* Nortel 5520 Ethernet Routing Switch
4. HP
* HP Procurve 5406xl
The Script has been tested with the above devices... If you have run this script against other devices, please let us know. Also the speed in the report function has drastically increased. I ran this script against a 6509 with 800+ devices connected to it in just over 2 minutes.
Link Below..
http://www.linuxdynasty.org/port-revert-17-update.html Full Story |
This topic does not have any threads posted yet!
You cannot post until you login.
