How To Set Up Software RAID1 On A Running LVM System (Incl. GRUB2 Configuration) (Debian Squeeze)
Version 1.0
Author: Falko Timme
Follow me on Twitter
This guide explains how to set up software RAID1 on an already running LVM system (Debian Squeeze). The GRUB2 bootloader will be configured in such a way that the system will still be able to boot if one of the hard drives fails (no matter which one).
I do not issue any guarantee that this will work for you!
1 Preliminary Note
In this tutorial I'm using a Debian Squeeze system with two hard drives, /dev/sda and /dev/sdb which are identical in size. /dev/sdb is currently unused, and /dev/sda has the following partitions (this is the default Debian Squeeze LVM partitioning scheme - you should find something similar on your system unless you chose to manually partition during the installation of the system):
- /dev/sda1: /boot partition, ext2;
- /dev/sda2: extended, contains /dev/sda5;
- /dev/sda5: is used for LVM (volume group server1) and contains / (volume root) and swap (volume swap_1).
In the end I want to have the following situation:
- /dev/md0 (made up of /dev/sda1 and /dev/sdb1): /boot partition, ext2;
- /dev/md1 (made up of /dev/sda5 and /dev/sdb5): LVM (volume group server1), contains / (volume root) and swap (volume swap_1).
This is the current situation:
df -h
root@server1:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/server1-root
4.5G 720M 3.6G 17% /
tmpfs 249M 0 249M 0% /lib/init/rw
udev 244M 104K 244M 1% /dev
tmpfs 249M 0 249M 0% /dev/shm
/dev/sda1 228M 16M 201M 8% /boot
root@server1:~#
fdisk -l
root@server1:~# fdisk -l
Disk /dev/sda: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003717c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 32 248832 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 32 653 4990977 5 Extended
Partition 2 does not end on cylinder boundary.
/dev/sda5 32 653 4990976 8e Linux LVM
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table
Disk /dev/dm-0: 4844 MB, 4844421120 bytes
255 heads, 63 sectors/track, 588 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 264 MB, 264241152 bytes
255 heads, 63 sectors/track, 32 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/dm-1 doesn't contain a valid partition table
root@server1:~#
pvdisplay
root@server1:~# pvdisplay
--- Physical volume ---
PV Name /dev/sda5
VG Name server1
PV Size 4.76 GiB / not usable 2.00 MiB
Allocatable yes (but full)
PE Size 4.00 MiB
Total PE 1218
Free PE 0
Allocated PE 1218
PV UUID 8p9j8i-cc9a-bAJq-LFP9-CBMF-JrPl-SDbx4X
root@server1:~#
vgdisplay
root@server1:~# vgdisplay
--- Volume group ---
VG Name server1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 1
Act PV 1
VG Size 4.76 GiB
PE Size 4.00 MiB
Total PE 1218
Alloc PE / Size 1218 / 4.76 GiB
Free PE / Size 0 / 0
VG UUID m99fJX-gMl9-g2XZ-CazH-32s8-sy1Q-8JjCUW
root@server1:~#
lvdisplay
root@server1:~# lvdisplay
--- Logical volume ---
LV Name /dev/server1/root
VG Name server1
LV UUID 8SNLPE-gHqA-a2LX-BO9o-0QQO-DV2z-3WvTYe
LV Write Access read/write
LV Status available
# open 1
LV Size 4.51 GiB
Current LE 1155
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:0
--- Logical volume ---
LV Name /dev/server1/swap_1
VG Name server1
LV UUID kYaKtb-vkkV-TDDE-me1R-nnER-dzN8-BcVTwz
LV Write Access read/write
LV Status available
# open 1
LV Size 252.00 MiB
Current LE 63
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:1
root@server1:~#
2 Installing mdadm
The most important tool for setting up RAID is mdadm. Let's install it like this:
apt-get install initramfs-tools mdadm
MD arrays needed for the root file system: <-- all
Afterwards, we load a few kernel modules (to avoid a reboot):
modprobe linear
modprobe multipath
modprobe raid0
modprobe raid1
modprobe raid5
modprobe raid6
modprobe raid10
Now run
cat /proc/mdstat
The output should look as follows:
root@server1:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
unused devices: <none>
root@server1:~#
3 Preparing /dev/sdb
To create a RAID1 array on our already running system, we must prepare the /dev/sdb hard drive for RAID1, then copy the contents of our /dev/sda hard drive to it, and finally add /dev/sda to the RAID1 array.
First, we copy the partition table from /dev/sda to /dev/sdb so that both disks have exactly the same layout:
sfdisk -d /dev/sda | sfdisk --force /dev/sdb
The output should be as follows:
root@server1:~# sfdisk -d /dev/sda | sfdisk --force /dev/sdb
Checking that no-one is using this disk right now ...
OK
Disk /dev/sdb: 652 cylinders, 255 heads, 63 sectors/track
sfdisk: ERROR: sector 0 does not have an msdos signature
/dev/sdb: unrecognized partition table type
Old situation:
No partitions found
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
New situation:
Units = sectors of 512 bytes, counting from 0
Device Boot Start End #sectors Id System
/dev/sdb1 * 2048 499711 497664 83 Linux
/dev/sdb2 501758 10483711 9981954 5 Extended
/dev/sdb3 0 - 0 0 Empty
/dev/sdb4 0 - 0 0 Empty
/dev/sdb5 501760 10483711 9981952 8e Linux LVM
Warning: partition 1 does not end at a cylinder boundary
Successfully wrote the new partition table
Re-reading the partition table ...
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
root@server1:~#
The command
fdisk -l
should now show that both HDDs have the same layout:
root@server1:~# fdisk -l
Disk /dev/sda: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003717c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 32 248832 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 32 653 4990977 5 Extended
Partition 2 does not end on cylinder boundary.
/dev/sda5 32 653 4990976 8e Linux LVM
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 32 248832 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sdb2 32 653 4990977 5 Extended
Partition 2 does not end on cylinder boundary.
/dev/sdb5 32 653 4990976 8e Linux LVM
Disk /dev/dm-0: 4844 MB, 4844421120 bytes
255 heads, 63 sectors/track, 588 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 264 MB, 264241152 bytes
255 heads, 63 sectors/track, 32 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/dm-1 doesn't contain a valid partition table
root@server1:~#
Next we must change the partition type of our three partitions on /dev/sdb to Linux raid autodetect:
fdisk /dev/sdb
root@server1:~# fdisk /dev/sdb
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): <-- m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): <-- t
Partition number (1-5): <-- 1
Hex code (type L to list codes): <-- L
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx
5 Extended 42 SFS 86 NTFS volume set da Non-FS data
6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility
8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt
9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access
a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT
f W95 Ext'd (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary
16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT
1e Hidden W95 FAT1
Hex code (type L to list codes): <-- fd
Changed system type of partition 1 to fd (Linux raid autodetect)
Command (m for help): <-- t
Partition number (1-5): <-- 5
Hex code (type L to list codes): <-- fd
Changed system type of partition 5 to fd (Linux raid autodetect)
Command (m for help): <-- w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
root@server1:~#
The command
fdisk -l
should now show that /dev/sdb1 and /dev/sdb5 are of the type Linux raid autodetect:
root@server1:~# fdisk -l
Disk /dev/sda: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003717c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 32 248832 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 32 653 4990977 5 Extended
Partition 2 does not end on cylinder boundary.
/dev/sda5 32 653 4990976 8e Linux LVM
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 32 248832 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary.
/dev/sdb2 32 653 4990977 5 Extended
Partition 2 does not end on cylinder boundary.
/dev/sdb5 32 653 4990976 fd Linux raid autodetect
Disk /dev/dm-0: 4844 MB, 4844421120 bytes
255 heads, 63 sectors/track, 588 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 264 MB, 264241152 bytes
255 heads, 63 sectors/track, 32 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/dm-1 doesn't contain a valid partition table
root@server1:~#
To make sure that there are no remains from previous RAID installations on /dev/sdb, we run the following commands:
mdadm --zero-superblock /dev/sdb1
mdadm --zero-superblock /dev/sdb5
If there are no remains from previous RAID installations, each of the above commands will throw an error like this one (which is nothing to worry about):
root@server1:~# mdadm --zero-superblock /dev/sdb1
mdadm: Unrecognised md component device - /dev/sdb1
root@server1:~#
Otherwise the commands will not display anything at all.
