Benchmarking Linux filesystems on software RAID 1
|
|
A couple of months ago I got a couple of wonderful birthday presents. My lovely geeky girlfriend got me two Western Digital 500 GB SATA 3.0 drives, which were promptly supplemented with a 3ware 9550XS 4-port hardware RAID card. Immediately I came up with the idea for this article. I had just read up on mdadm software RAID so I though it would be perfect to bench mark the hardware RAID against the software RAID using all kinds of file systems, block sizes, chunk sizes, LVM settings, etcetera. Or so I though… As it turns out, my (then) limited understanding of RAID and some trouble with my 3ware RAID cards meant that I had to scale back my benchmark quite a bit. And to top it off I discovered some nasty problems with 3ware 9550 RAID cards under Linux that quickly made me give up on hardware RAID. I still ended up testing various filesystems using different blocksizes and workloads on an mdadm RAID 1 setup, so the results should still prove interesting.
|
|
Full Story |
This topic does not have any threads posted yet!
You cannot post until you login.
