Striping Across Four Storage Nodes With GlusterFS 3.2.x On CentOS 6.3

Posted by falko on Jan 21, 2013 5:04 PM EDT
HowtoForge; By Falko Timme 		Mail this story
Print this story

This tutorial shows how to do data striping across four single storage servers (running CentOS 6.3) with GlusterFS. The client system (CentOS 6.3 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

This tutorial shows how to do data striping across four single storage servers (running CentOS 6.3) with GlusterFS. The client system (CentOS 6.3 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

http://www.howtoforge.com/striping-across-four-storage-nodes-with-glusterfs-3.2.x-on-centos-6.3

Full Story

  Nav
» Read more about: Story Type: Tutorial; Groups: Red Hat

« Return to the newswire homepage

This topic does not have any threads posted yet!

You cannot post until you login.