47 results found
) Next »
Gumstix’s Linux-driven Overo IronStorm-Y module and Caspa VL camera traveled to Mars on a pair of “MarCO” CubeSat satellites, helping to confirm the successful landing of NASA’s Mars Insight lander. When the Mars Insight lander set down on the Martian surface on Nov. 26, the landing signal that followed the “seven minutes of terror” descent […]
Gumstix has expanded its Linux-oriented Geppetto online embedded board development platform with a free “Board Builder” service that offers a checklist interface for selecting modules, ports, and more. Gumstix has added a free Board Builder service to its Geppetto Design-to-Order (D2O) custom board design service. The Board Builder improvements make the drag-and-drop Geppetto interface even […]
Gumstix announced a version of its Aerocore 2 drone control board that runs Linux on Nvidia’s Jetson TX2. The Geppetto customizable board provides a Cortex-M4 running PX4, and offers USB 3.0, micro-HDMI, and support for LTE, GPS, and 4x HD cameras. The Aerocore 2 drone control board arrived in 2014 and was followed in 2016 […]
Gumstix has launched a version of its Linux-driven Chatterbox Alexa Voice Service development board designed for the RPi Compute Module, and updated its AeroCore 2 drone controller for the DragonBoard 410C. Gumstix has developed a variation on its recently announced Chatterbox for the Colibri iMX7 that is instead powered by a Raspberry Pi Compute Module. […]
The Gumstix “Chatterbox for the Colibri iMX7” is a Geppetto-customizable, Linux-driven Alexa Voice Service development board that features Toradex’s i.MX7 based module, and offers a 2.5-Watt speaker driver, mic and audio jacks, plus WiFi, BT, Ethernet, USB, and more. Gumstix has partnered with Toradex to launch an Amazon Alexa Voice Service (AVS) development board with […]
Gumstix’s Arduino-driven “RoomSense” board offers an ATSAMW25 MCU, WiFi, passive-IR, and sensors. Gumstix also unveiled a device tree tool for Geppetto. The Gumstix RoomSense is a USB dongle board that can detect room occupancy using passive infrared (PIR) technology and report on temperature, humidity, and barometric conditions.
Gumstix has added NXP’s tiny, Linux-driven SCM-i.MX6 module to its Geppetto design library, and has launched a “Cobalt MC” SBC to showcase the tiny COM. Gumstix continues to add more computer-on-modules and single board computers to its Geppetto D2O design library, offering more options for developers to build custom board designs online for prototyping and quick manufacture of small runs.
Gumstix added to its line of “Gumstix Pi” add-ons for the Pi and Pi Compute Module 3 with a Stepper HAT, a breakout, and a PoE-driven LoRa gateway. In August, Gumstix announced several LoRa add-ons to its Geppetto board design service that work with a RisingHF LoRa module, and launched LoRa boards based on its […]
Gumstix added Arduino IDE support to its Geppetto design service for boards based on the Intel Curie. It also shipped a Curie-based “Radium 96BIE” SBC. Last September, Gumstix unveiled two single board computers based on Intel Joule and Curie modules, and built to 96Boards CE and the new, MCU-oriented 96Boards IE (IoT Edition) form-factor specifications, respectively.
Gumstix launched a customizable version of its LTE-enabled, PX4-compatible AeroCore 2 MAV controller board that works with the Intel Joule. Gumstix announced the AeroCore 2 Expansion Board for Intel Joule expansion board in August along with five other expansion boards designed for the Intel Joule, a follow-on to the Intel Edison computer-on-module with a much […]
Gumstix announced two SBCs this week, based on Intel Joule and Curie IoT modules and built to 96Boards CE and IE form-factor specifications, respectively. At Linaro Connect Las Vegas 2016, where earlier this week Linaro’s 96Boards.org announced a new 96Boards IoT Edition (IE) spec, Gumstix announced support for 96Boards.org’s open SBC standards with two new […]
Gumstix announced two 96Boards form-factor carrier boards, based on Intel’s Joule and Curie modules, that can be customized with its Geppetto design tool. At Linaro Connect Las Vegas 2016, where earlier this week Linaro’s 96Boards.org announced a new 96Boards IoT Edition (IE) spec, Gumstix announced support for 96Boards.org’s open SBC standards with two new customizable […]
Gumstix unveiled a baseboard for TechNexion’s Linux-friendly, i.MX6-based, Pico-IM6X COM that can be customized with its Geppetto design service. Gumstix continues its Geppetto tour of major IoT-oriented ARM computer-on-modules with a customizable “PICO-IMX6 Development Board” designed to actualize the TechNexion PICO-IMX6 module.
Gumstix launched a family of customizable carrier boards in conjunction with Intel’s unveiling of the tiny “Joule” IoT module at IDF in San Francisco today. Intel unveiled the Joule IoT module in a keynote talk by Brian Krzanich at the 2016 Intel Developer Forum today in San Francisco. The 48 x 24 x 3.5mm module […]
Gumstix has launched an open-source “Garret 50C” carrier board for its 58 x 17mm, dual-core DuoVero computer-on-module family, the company’s higher-end alternative to its single-core Overo COMs. The board was developed with the company’s online Geppetto DIY design and quick-turn prototype manufacturing service, which customers can use to customize the board.
Gumstix and Arrow launched a customizable DragonBoard 410C expansion board for UAV and MAV applications, that adds NimbeLink LTE and camera support. Gumstix and Arrow Electronics announced the availability of a $149 variant of its AeroCore 2 board called the “AeroCore 2 Expansion Board for DragonBoard 410C.”
The Gumstix “Poblano 43C SBC” features a TI AM4378 SoC with WiFi, Bluetooth, GbE, and optional cameras, touchscreens, and Geppetto-based design customization.
Gumstix added a customizable carrier board for Toradex’s Colibri i.MX6 COM to its drag-and-drop online Geppetto quick-turn PCB design and manufacturing service. The Gumstix Colibri i.MX6 Development Kit for the Toradex Colibri i.MX6 computer-on-module follows a string of customizable baseboards for third-party computer-on-modules that can be developed and manufactured using Gumstix’s online Geppetto DIY design […]
Gumstix has added a customizable carrier board design for Critical Link’s MitySOM-335x COM to its quick-turn carrier board design and manufacturing service.
Gumstix has added a Raspberry Pi Compute Module baseboard design to its online DIY board dev tool, and is selling working units based on the design for $49. Back in November, Gumstix opened up its Geppetto online DIY design tool and quick-turn prototype manufacturing service to the development of carrier boards for third-party SBCs and […]
) Next »